UPG1

$36.00

The UPG1 is an upgraded Ethernet module that allows older controllers  
such as the E680 and E681 to run the latest firmware.

If your E680 or E681 has the red rectangular Ethernet module, that is  
the old style module, and you are limited to firmware version 2.

Replacing that module with a UPG1 will allow your board to control up  
to 12 universes (2,040 pixels) and run the latest firmware.

Contact SanDevices for the proper firmware file.

Out of stock

Category:

The UPG1 is an upgraded Ethernet module that allows older controllers  
such as the E680 and E681 to run the latest firmware.

If your E680 or E681 has the red rectangular Ethernet module, that is  
the old style module, and you are limited to firmware version 2.

Replacing that module with a UPG1 will allow your board to control up  
to 12 universes (2,040 pixels) and run the latest firmware.

Contact SanDevices for the proper firmware file.

Manuals/Firmware

Contact jim@SanDevices for the proper firmware file.

UPG1_Upgrade_Module

UPG1_Installation_via_LAN

UPG1_Installation_Procedure_with_Version_4_Firmware_July_2013

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.